Overview and origin of Stamping Die and Metal Stamping

Overview and origin of Stamping Die and Metal Stamping

Metal stamping (also known as stamping) is a process in which flat metal is put into a stamping mold in the form of a blank or coil to perform a stamping process. The surface of the stamping mold usually requires heat treatment to increase hardness. Punching includes forming various metal plates, such as punching, punching, embossing, bending, flanging and embossing using a punch or hydraulic press. This can be a single-engineering operation, where each process of the punching machine produces the desired shape on the sheet, or it can be automated stamping with a hardware continuous die. The stamping process is usually performed on metal plates, but it can also be used for other materials, such as plastic sheets such as polystyrene. The stamping progressive die is usually made of steel coils, which are used to feed the coils into a straightening machine to level the coils, and then into the feeder, which feeds the material into the press and presses through the metal stamping die for press forming. According to the complexity of the part, the stamping process and the number of stamping die stations can be determined.To get more news about progressive die stamping, you can visit tenral.com official website.

Metal stamping is usually cold stamped on a metal plate. Metal stampings mass produced bicycles in the 1880s. Metal stamping replaces die forging and machining, which greatly reduces costs. Although not as strong as the forged parts, they are of good enough quality.

Stamped bicycle parts were imported from Germany to the United States in 1890. American companies then began to own presses customized by American machine tool makers. Western Europe was then able to stamp most stamped parts of bicycle hardware.

Several automakers used hardware stampings before Ford Motor Company. Henry Ford rejected the engineer's suggestion and refused to use stamped parts, but when the company could not meet the demand for die forgings, Ford was forced to use stamped parts later.

In the history of metal stamping, forging and deep drawing, various types of punches have been the backbone of metal manufacturing. Presses and interconnected automation equipment (automatic feeders, levelers) increase productivity, reduce labor costs, and provide factory workers with a higher level of safety.